晨怡热管 >> 资料积累 >> 国外文献 >> Professional Full Solar Hot Water System heat-pipe, pressured tank and exchanger

Professional Full Solar Hot Water System heat-pipe, pressured tank and exchanger

晨怡热管 2008-1-31 15:13:58

This solar hot water system is ready to be installed. Collectors are using heat pipe technology, stainless steel frame and all package is included of pressured tank stainless steel made with copper exchanger, digital controller, circulation pump water, magnesium anode, optionally heat resistance, safety valve, check valve and circulatory system. Highly efficence for wormer country as well.

Specification and included accessories :

high pressure tank stainless steel with copper exchanger - magnesium anode and resistor 1500w - stainless steel collectors using heat pipe technology - circulation pump water and integrated controller - Alluminium frame (flat/inclined).
It's a professional solar hot water system ready to be installed.
Professional Heat Pipe Technology Section

Professional Heat Pipe Technology Section

Model	Boiler Litres	Tubes			Thermal transfer
Model	Boiler Litres	N.	Lenght	Diameter	Thermal transfer
SCF-PRO58-150	150	18	1800mm	58mm	1620W
SCF-PRO58-200	200	24	1800mm	58mm	2170W
SCF-PRO58-300	300	30	1800mm	58mm	2700W
Prices from only 2.989€ 10 anni guaranteed on collectors, 5 years on tank e 2 years on all other included parts Delivery and Installation costs are applicable to the client

Features :

Certificate collectors EN12975-2
Minimum power of 525kwh/mq (SPF cerficated)
Outer collecter made by stainless steel
Frame made by stainless steel
Heat pipe made by copper
Insulating layer : rock wool
Sealing rubber : silicon rubber high temperature resistant
Testing pressure : 9 bar
Frame : flat / inclined
Mounting angle : 30° - 50°
Inlet/Outlet : ¾''
silver-plated condenser heat pipe corrosion inhibitor
High pressure boiler;Integrated parts :
- Tense resistancere 1.500w
- magnesium anode
- Safety valve (6 bar/99°)

责任编辑: banye 参与评论