晨怡热管  哈尔滨晨怡热管技术有限公司  晨怡热管技术研究所

晨怡热管 2008-2-3 22:10:03

 [Features]

1. Non-chlorofluorocarbon type!
   
   Non-chlorofluorocarbon system using hydraulic fluid.
   
2. High cooling capacity!
   
   Copper dozens of times to several hundred times the thermal conductivity using a heat pipe cooling capacity so high for them.
   
3. Compact and lightweight!
   
   Lightweight and compact design has been so installation is easy transportation to a compact control panel.
   
4. Rich!
   
   According to the economic capacity of the model selection.
   Ceiling mounting shape, and be prepared to shape aspects of fixing our attachment to the free choice of location.
   
5. Space-saving flat-screen! (Side-shaped attachment)
   
   So slimline machine HAKAREMASU in the effective use of space.
   Shape as well as mounting machine inner outer surface mounting machine to be ready.
   
6. Maintenance is easy!
   
   Simple structure, so fans can easily exchange and maintenance are easy life.
   
7. By condensation is not too cold!
   
   Unlike refrigerator cooled by the cold too bad by condensation, and condensation by insulation does not cause concern.
   

 

Avenues for

Various machine control, machine power electronics, switchboard, the electrical room and optimal cooling.

 

Cooling principle machine

---

Heat pipe cooling principle to the right by drawing board. Machine parts in electronic devices such as electric-machine fever in the air temperature rise of the internal heat pipe fan of the heat pipe heat receiving department to pass on the heat to circulate in addition to the board. The heat pipe heat in principle to move part of the radiator, introduced here by the external fan cooled by the outside air in the radiator. Such equipment in the machine to the external environment protected from evil, while inside the machine-cooled air in a sealed state.

Selection procedure

---

selection of the selection criteria] [Example 1) Q = 800W machine in calorific value 2) outside air temperature Tr = 40 ℃ 3) platen surface area (1) A = 4.5 m2 4) the allowable air temperature rise in the machine Δ Ta = 15K selection procedure 1) Q = 800W machine in terms of calorific value (in Figure ①) from the board rise in the average temperature of 15K = Δ T intersections between lines and ask (②). 2) ② point from a line parallel to the horizontal axis machine off nodical ² surface area A = 4.5 (③) ask. 3) C-point cross from just above the point at the intersection of horizontal and cooling capacity required (④) from 31W = K / K is required. 4) cooling heat exchanger capacity to cover the value of the corresponding models to display the form required cooling capacity, so the selection of more than please. In this example, or the FPX CPX-07B-07B will be able to select.

◇◇◇◇◇◇ Attention ◇ ◇ ◇ ◇ ◇ ◇ ● above the regular general election to show the selection procedure. Board composition and structure of the situation, including the placement of the internal components of the cooling effect is selected you may not get any, Is a certain amount of leeway to choose with you choose, please. ● Figure cooling capacity in the heat exchanger unit W / K temperature difference is about 1 K (℃) heat transport W (watts). Surface area (※ 1) Game 6 is generally think in terms of sum of the surface. The criteria established by the board is part of the surface of the radiator used if no part of the area is less please.

Series Product

---

CPX form (form ceiling mount)	FPX form (form side attachment)

责任编辑: banye 参与评论